Multi Foil Insulation
Multi-layered Superfoil insulation is a material combining layers of thin reflective foil between thermo foam and wadding. It is a high tech insulator which provides effective protection from heat loss. It's a new insulation solution that is much thinner than traditional insulation methods yet still provides the same thermal efficency. Multifoils have radiant reflective properties, reflecting unwanted heat from solar gain in summer and enhancing insulation in winter. SF19 also has air barrier properties and can control air movement for further energy efficiencies. Comparative energy assessment indicates that multilayer foils have benefits over traditional (non-reflective) insulation. These products are perfectly suitable for insulating residential, commercial and industrial buildings, in roofs, attics, walls and floors.
At Progressive Products, we stock a range of Superfoil products:
SuperFOIL SF19 is one of the UK's best value multi-layer foil insulation products. Consisting of 19 layers of reflective foil, with thermo foam separation layers. SuperFOIL SF19 is easier to handle, install, cut and seal than other forms of building insulation, and lasts over 50 years with minimal loss of performance caused by dust, drafts, pests or osmosis.
SF19 is ideal for use in walls and roof structures in new, renovation, refurbishment and extension projects; you can use SF19 in walls without excessive loss of valuable floor space.
Key Features
- Hot Box 'R' Value 2.218
- Complies with building regs
- Air seal & radiant barrier
Technical
- Total coverage 18.75m2
- Total thickness 38mm
- Total layers 19
Installation
- Horizontal or vertical fitting
- 25mm air gap required
- Cut with knife or scissors
SuperFOIL SF40 is the UKs highest performing multi-layer foil insulation, used to reach levels 3, 4, 5 and 6 of the Code for Sustainable Homes. SuperFOIL SF40 maximises roof and wall insulation within an efficient amount of space.
SF40 is ideal for new build, extension and conversion projects and can be easily retro-fitted into buildings as it does not waste valuable and expensive floor space. SF40 can be used as an extra layer over and above traditional fibre insulations to "Super Insulate" your home and allow it to achieve it's maximum energy savings.
Key Features
- Hot Box 'R' Value 3.564
- Complies with building regs
- Air seal & radiant barrier
Technical
- Total coverage 15m2
- Total thickness 60mm
- Total layers 36
Installation
- Horizontal or vertical fitting
- 25mm air gap required
- Cut with knife or scissors
SuperFOIL SFUF is a multi-layer foil insulation for use with solid and suspended floors. It can also be used to insulate in other areas, including walls and ceilings. Consisting of 13 layers of reflective foil, thermo foam separation layers and topped with a PE layer, SFUF is the ideal for use with hot water underfloor heating systems.
SFUF reflects heat back into the room, at the same time improving airtightness and resisting the passage of moisture. It vastly improves energy performance and also reduces impact noise.
Key Features
- Hot Box 'R' Value 0.8
- Complies with building regs
- Resists passage of water
Technical
- Total coverage 18.75m2
- Total thickness 6mm
- Total layers 13
Installation
- Designed to insulate solid and suspended floors
- Cut with knife or scissors
SuperFOIL is being used in large and small projects across the UK and Ireland. We are very pleased to be able to share with you the experiences of a number of our customers who have chosen to use SuperFOIL in conversions, new builds, renovations and commercial buildings.
Glenn - Manchester
I can't believe how easy it was to fit the insulation. No more paper suits or masks and a lot less lifting.
Jamie - London
Great product, it has transformed the insulation of housing.
Phillip - Hertfordshire
I found this product easy to use and a pleaure to install compared to previous products on the market.
Alan - Project - Extension to Children's Nursery
Local Authority: Merseyside
We are extending our nursery and we are using SF19 in both the walls and the flat roof. SF19 is brilliant….so easy to handle. Just like the purchase a simple telephone call, some technical assistance and add next day delivery and you have a great result.
Craig - New build
Local Authority: Newark & Sherwood
We have used SF19 to 'Super Insulate' our home; our project was well advanced when we came across SF19 but given the performance and the price we had no hesitation to install
Caroline - Project - Conversion of an Old Chapel
Local Authority: South Kesteven
We applied sf19 directly under tiles with the approval of our Building Inspector and because it was so easy to fit it took no time to complete.
JA Ten Wolder - Barn Conversion
Local Authority: Gwynedd
The decision was easy and the assistance we received in working through the assessment with our Building Inspector was right on the button.
Cees from VoRa Trading
Local Authority: Netherlands
Delivered some presents to customers the last days. It is just below freezing here together with some fog this gives beautiful scenery. The monument is near the airborne museum in our village. Former HQ of the paratroops during the battle of Arnhem, about 300m from my house.
All information and technical details on this site are taken from the manufacturers details. Progressive Products Ltd cannot guarantee the information. It is the responsibility of the customer to confirm with the relevant authroities the use of the materials before purchase.
SuperFOIL SF60 is the UK's new highest performing multi-layer foil insulation, use to reach levels 3, 4, 5 and 6 of the Code for Sustainable Homes. SuperFOIL SF60 maximises roof loft and wall insulation within an efficient amount of space.
SF60 is ideal for new build, extension and conversion projects and has air barrier properties and can control air movement for further energy efficiencies. SF60 can be used under or over rafters to "Super Insulate" your home and allow it to achieve it's maximum energy savings.
Key Features
- Hot Box 'R' Value 4.643
- Complies with building regs
- Air seal & radiant barrier
Technical
- Total coverage 12m2
- Total thickness 100mm
- Total layers 53
Installation
- Horizontal or vertical fitting
- 50mm air gap required
- Cut with knife or scissors